How many coats of POR-15 do I need?

1. Apply POR-15 in thin coats.
2. For Two Coat Application: Apply second coat when first coat is tacky but almost dry.
3. If first coat is fully cured, wet sand first coat with 600 grit sandpaper until gloss is dulled.
4. Next, apply the second coat of POR-15.

Then, Can you put POR-15 on bare metal? After thoroughly degreasing your work piece, apply environmentally safe POR-15 Metal Prep to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15 Rust Preventive Coating or any other coating. This metal-etching rust neutralizer is not caustic, corrosive, toxic or flammable.

however, Can you paint directly over POR-15?

Can you use POR-15 without metal prep? No. Metal-Ready must be used first before applying POR-15 when 1. Painting on galvanized metal.

Yet, How do I prepare for POR-15? Use of POR-15 Cleaner Degreaser is highly recommended before application. POR-15 Metal Prep works faster at temperatures above 70°F. Apply with brush, roller, spray, or dip rusted metal directly into solution. On Bare Or Rusted Metal Surfaces: Keep surface wet for 20 minutes, then rinse thoroughly with water.

Do you have to use metal prep before POR-15?

POR-15 Metal Prep provides the best adhesion for POR-15 Rust Preventive Coating and any opaque primer or top coat paint. Metal Prep gently etches metal, creating an ideal anchor pattern for coatings, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint to steel and other metals.

Do you have to use metal prep for POR-15?

Is it always necessary to apply Metal-Ready first before using POR-15 Rust Preventive Paint? No. Metal-Ready must be used first before applying POR-15 when 1. Painting on smooth, polished, or new metal surfaces.

Do I have to wash off por-15 metal prep?

Must I wash off the Metal-Ready after using it? Yes… If Metal Ready is not rinsed off you will get a large accumulation of zinc phosphate on the surface which will affect proper adhesion with POR-15.

Is POR-15 an epoxy?

Por15 epoxy a little bit will do ya. For restoring old cars that have rust pockets, this is the material to use.

Can you put por-15 on bare metal?

After thoroughly degreasing your work piece, apply environmentally safe POR-15 Metal Prep to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15 Rust Preventive Coating or any other coating. This metal-etching rust neutralizer is not caustic, corrosive, toxic or flammable.

Is por-15 metal prep necessary?

Removes rust stains from non-metallic surfaces such as porcelain, ceramic, fiberglass. Is it always necessary to apply Metal-Ready first before using POR-15 Rust Preventive Paint? No. Metal-Ready must be used first before applying POR-15 when 1.

Can you primer over por15?

With the POR-15 Self Etch Primer spray can, you can even topcoat POR-15 Rust Preventive Coating that’s been in place for months or years. POR-15 Self Etch Primer is NOT a high-build primer like POR-15 High Build Primer, but it can be sprayed on almost any painted surface and can be top coated in 20 – 30 minutes.

Do you have to use metal prep with POR-15?

Is it always necessary to apply Metal-Ready first before using POR-15 Rust Preventive Paint? No. Metal-Ready must be used first before applying POR-15 when 1. Painting on galvanized metal.

Can you spray POR-15 out of a paint gun?

Can you use any paint over POR-15?

Which rust remover is best?

The best rust remover

• The best overall: Evapo-Rust The Original Super Safe Rust Remover.
• The best on a budget: Whink Rust Remover.
• The best multipurpose: WD-40 Specialist Rust Remover Soak.
• The best for household: Iron Out Spray Rust Stain Remover.
• The best for heavy duty: Corroseal Water-Based Rust Converter Metal Primer.

What colors does POR-15 come in?

• Gloss Black.
• Chassis Black.
• Silver.
• Clear.
• Gloss White.
• Safety Red.
• Safety Orange.
• Safety Yellow.