Research has shown adding fitted wardrobes to your property can potentially increase the value of your home. Fitted wardrobes are more likely to attract potential buyers as this is seen as a luxury feature which can definitely help when trying to decide if fitted wardrobes are worth it.
Additionally, Do fitted wardrobes add value to house? Whilst most people usually buy fitted bedroom furniture to give them more storage space and accommodate awkward nooks within a room, an added benefit is that it can add value to a property. If fitted to a high standard by a reputable firm, the added value can even surpass the total cost of the installation.
What is a PAX wardrobe?
PAX wardrobe sets mean storage that really matches your space. Ours also mean you can choose frames and doors that match your style and interior fittings that suit what you wear. Choose between our pre-designed combinations or go all the way and create your own tailor-made wardrobe.
Also, Should fitted wardrobes have backs? “We generally advise that you don’t decorate your room prior to fitting,” says Rachel. “However, as our wardrobes are fitted without backs and sides as standard, if you’re planning to redecorate the walls, then you may wish to do this before installation as these walls will be on show when the doors are open.
What is the difference between fitted and built-in wardrobes?
The short answer to this question is no, there’s no difference between fitted wardrobes and built-in wardrobes. The phrases are used to describe the same thing.
Beside this, Can fitted wardrobes cause damp? Causes of Damp in Wardrobes
Depending on where they’re installed, fitted bedroom wardrobes can be affected by damp or mould if it’s lingering in the air. Given that they’re fixed to walls, floors and ceilings, air circulation behind the fitted wardrobe panels is almost entirely cut off.
Can a joiner make fitted wardrobes? Bespoke fitted wardrobes. Opting for an independent carpenter or joiner means that you aren’t limited to the options available from a specific brand. So you’re more likely to get storage designed to fit your room and requirements precisely.
How much does it cost to install a built-in wardrobe? A built-in wardrobe can cost you between $1,000-$5000 which covers the cost of shelves, cabinets and drawers. A walk-in wardrobe on the other hand can cost you between $10,000-$20,000 as in addition to the shelves, cabinets and drawers, you also have to factor in the flooring, lighting and paint.
What depths do PAX wardrobes come in?
Luckily, IKEA’s PAX wardrobes come in two depths (44cm and 66cm) and two heights (201cm and 236cm – remember you need about 10cm clearance at the top to allowing for raising after the assembly).
Do PAX wardrobes have to be attached to the wall? “With all clothing storage, IKEA requires them to be attached to the wall,” he wrote. “Unlike other wall anchor brackets for IKEA products, the PAX brackets require them to be mounted flush against the wall for the most support (fully loaded with clothing these units can be very heavy.)
How do PAX wardrobes work?
With these you hang your clothes front-on as the wardrobe is not deep enough to hang your clothes side-on. This rail pulls out, allowing you access to the clothes hanging up at the back. Both of these rails come in either white or dark grey. With the PAX system, you can have as many shelves as you like.
How do I stop mould behind my fitted wardrobe? Drilling holes into the back of the wardrobe can provide some much-needed ventilation, which can allow any excess moisture to escape. Also, making sure the wardrobes are heated (even if it is just a constant low heat) will reduce the chances of damp forming.
How do I stop damp in my wardrobe?
10 Tricks to Keep the Dampness Out of Your Cupboards
- Check for External Sources of Water Seepage. …
- Remove Any Mould that is Already Present in Wardrobes. …
- Remove Mould in Bathrooms. …
- Make Sure That There is Good Air Flow. …
- De-clutter and Deep Clean. …
- Line Shelves with Paper. …
- Keep Humidity Levels Low. …
- Never Store Damp Items.
Why have a built-in wardrobe?
There are several good reasons to install one: A built-in wardrobe is an integral part of the room design. Built-ins can be larger than freestanding wardrobes. A built-in wardrobe can take up less space than a freestanding wardrobe of the same size.
How do you install a built-in wardrobe?
How do you ventilate built-in wardrobes? Improve ventilation in the property by opening windows where possible. Leave the wardrobe doors open allowing for circulation of clean fresh air. We would recommend fitting static vent plates to the top and bottom of the wardrobe, especially to units fitted against colder exterior walls.
How do you prevent mold in built in wardrobes?
How to stop mould in a wardrobe
- Use a 50/50 vinegar and water solution. Treat with a 50/50 mixture of vinegar and water. …
- Wipe the solution over the affected surfaces with a cloth. …
- Treat with undiluted vinegar and leave to dry. …
- Rinse the surfaces with cold water and then towel-dry.
How do I stop damp in my built in wardrobe? 10 Tricks to Keep the Dampness Out of Your Cupboards
- Check for External Sources of Water Seepage. …
- Remove Any Mould that is Already Present in Wardrobes. …
- Remove Mould in Bathrooms. …
- Make Sure That There is Good Air Flow. …
- De-clutter and Deep Clean. …
- Line Shelves with Paper. …
- Keep Humidity Levels Low. …
- Never Store Damp Items.
Can a carpenter build wardrobes?
Drawing upon more than 15 years’ of experience designing and installing bespoke fitted wardrobes for homeowners across London, Solid Carpentry can specifically design a bespoke wardrobe that is perfect for your home.
How long does it take for carpenter to build wardrobe? Production time for most of the projects will be somewhere between 4-6 weeks.
How deep should fitted wardrobes be?
We recommend that wardrobes are fitted at 660 – 670mm deep (overall) from the back wall to the front of the top track, this is considered to be an optimum depth for sliding wardrobes. The minimum depth should not be less than 610mm overall. Below this depth, normal use will be impaired.
How do I stop mould in my fitted wardrobes? How to stop mould in a wardrobe
- Use a 50/50 vinegar and water solution. Treat with a 50/50 mixture of vinegar and water. …
- Wipe the solution over the affected surfaces with a cloth. …
- Treat with undiluted vinegar and leave to dry. …
- Rinse the surfaces with cold water and then towel-dry.
✅ Join our Customer Support & Advices Community and share you ideas today !
